HNKTech Europe Ltd. (Wimbledon, UK), a consultancy and developer ofcustomized FEA (finite element analysis) solutions, now offerssimulation software for electroplating components. The softwareproduces highly accurate coating uniformity, says the company, andreduces wastage costs, improves product quality, and time to market.
Traditional electroplating of such components as bearings, pistons, andlanding gear parts often results in an uneven finish as well as wastageas the plating technician tries to achieve uniformity through grindingand polishing. HNKTech’s FEA software works by creating a densitymodel. The model is displayed after inputting your electroplatingset-up including the geometric profile, material properties, andboundary conditions. Using these variables, the software simulates theelectroplating process then displays the density model with predictedplating thickness and uniformity.
Read the rest of this entry »
Electroplating is a process used to reduce the positively charged ions of a desired material, with the help of an electric current. The process also coats a conductive object with a thin layer of the material, such as a metal. Zinc electroplating is one of the most common forms of electroplating and popular because of its relatively low cost, protective nature and attractive appearance. The coating done through this process gives corrosion protection to ferrous components and it can give colors like gold, black or olive drab finish, by post treatment.
Read the rest of this entry »
If you’ve ever purchased inexpensive jewelry with a fine coating of precious metal, then you’ve witnessed the end result of electroplating. It’s an electrochemical reaction used to put a fine metallic coating on an object. Aside from making cheap jewelry, electroplating has important uses in the automotive industry for chrome plating, and in the electronics industry for optics and sensors.
The process of electroplating (also referred to as electrodeposition) is fairly simple. To start, a negative charge is placed on the object that will be coated. The object is then immersed in a salt solution of the metal that will be used to plate the object. From there, it’s simply a matter of attraction; the metallic ions of the salt are positively charged and are thus attracted to the negatively charged object. Once they connect, the positively charged ions revert back to their metallic form again and you have a newly electroplated object.
Read the rest of this entry »
The development of modern continuous sheet galvanizing lines has led to the disappearance of most of the old manual mills for galvanizing cut sheets. There are however still some machines that galvanize cut-to-length sheets; they use chemical pretreatment sequence similar to those for wire or tube galvanizing.
At the beginning of the line, the end of one coil is welded to the start of the next coil. Then there are two basic methods for continuously galvanizing sheet which differ in the way that the strip is cleaned before galvanizing-chemically or by thermal treatments. Coils of annealed cold reduced sheet may be fed directly to the galvanizing line, or alternatively, coiled sheet is continuously heat treated in the pretreatment line. After leaving the galvanizing bath, in which strip only stays for a few seconds, the surface is wiped to remove excess zinc and may be further treated to after the surface appearance, composition, smoothness or mechanical properties.
Read the rest of this entry »
Flexible printed circuit boards (FPCs) are applied to various electronic devices due to their mechanical characteristics and are indispensable to electronic devices requiring system miniaturization, weight reduction and multi-functionality. This article describes a new electrolytic copper plating technology which is an essential step in the manufacturing process of FPCs. This new electrolytic copper plating technology improves the manufacturing process and realizes higher functionality.
Application of FPC
FPCs are employed in a wide variety of applications due to the nature of their characteristics. Examples of applications for FPCs include cell-phone liquid crystal display enclosure, hinge parts, keypad, battery enclosure and interface components. FPCs are also used in optical pickup and device interfaces inside hard disk drives, digital still cameras and digital camcorders. Desired performance characteristics are: 1) wiring within small spaces; 2) wiring connection accompanied by mechanical functions within working part/device and motherboard; and 3) high density interconnect resulting from denser and narrower features.
Read the rest of this entry »